My build

[fukjoey]

Well since i dont seem to have a car nor i care
here is what i like to do and build
It is a 2001 400ex im doing a crf450 swap to it should have it almost fully together tomorrow had to notch the frame for the intake box to fix against the carb

the roller
http://i290.photobucket.com/albums/ll270/89isuzu/028.jpg
http://i290.photobucket.com/albums/ll270/89isuzu/029.jpg
http://i290.photobucket.com/albums/ll270/89isuzu/030.jpg
http://i290.photobucket.com/albums/ll270/89isuzu/033.jpg
http://i290.photobucket.com/albums/ll270/89isuzu/037.jpg

the notch in the frame
http://i290.photobucket.com/albums/ll270/89isuzu/022.jpg

the motor
http://i290.photobucket.com/albums/ll270/89isuzu/031.jpg
http://i290.photobucket.com/albums/ll270/89isuzu/032.jpg
http://i290.photobucket.com/albums/ll270/89isuzu/009.jpg
http://i290.photobucket.com/albums/ll270/89isuzu/011.jpg

[d21cruisa]

is that spray paint on the notch in the frame?!?!?!!??!

[fukjoey]

nope thats a very shitty prepped and sprayed base

[fukjoey]

and ive got the gallon of paint to prove it

[d21cruisa]

nope thats very shitty prepped and sprayed

obviously

[fukjoey]

its hidin so i dont really care

[one low fullsize]

well thats one way to get your point across lol with as warm as its been i cant belive you havent goten this thing done already

[fukjoey]

well thats one way to get your point across lol with as warm as its been i cant belive you havent goten this thing done already

i have been waiting on parts and i was getting water in my trans fluid somehow but i got it fixed now i will probably get it all together besides all the fluids in it tomorrow

[one low fullsize]

nice how many hp's this thing gonna pull any wayS?

[fukjoey]

around 55 i think. they are 55 stock on a dirt bike but thats less wheel spin and all this has is a pipe

[laidout]

did you decide to use the the fresh air vents or did you have an extra set you where selling they look cool on there

[1lowzu]

im still gonna beat you lol 55hp is for pussies

[85c10on20s]

i think this will be pretty sweet when its all done..and very fast to..my kx250f is bored to a 290f and it will take a crf450 all the way untiil the 450 hits 5th then it kinda pulls away..

[1lowzu]

i think this will be pretty sweet when its all done..and very fast to..my kx250f is bored to a 290f and it will take a crf450 all the way untiil the 450 hits 5th then it kinda pulls away..

sounds like you need to race a 450 with some one who knows how to ride it

[laidout]

lol i wouldnt race you if i had a bigger 4wheeler if i was winning you would bust out the pit munover

[fukjoey]

ok i got the motor in today
http://i290.photobucket.com/albums/ll270/89isuzu/001-2.jpg
http://i290.photobucket.com/albums/ll270/89isuzu/002-1.jpg
http://i290.photobucket.com/albums/ll270/89isuzu/003-1.jpg

[85c10on20s]

Hell Yea...what pipe are you going with? i have the Pro Circuit T-4 Titanium on my kx250f and its quiet until romped on.. Whenever you get this thing running make a walk around video of the sound of it..

[fukjoey]

its a nmotion exhaust

[1lowzu]

its a nmotion exhaust

it would look sexier with a sparks pipe

[fukjoey]

i found one for a hybrid for 200 but i want to see how this sounds first

[1lowzu]

i found one for a hybrid for 200 but i want to see how this sounds first

how long untill you try and fire it up because once it runs i will make you a front motormount

[fukjoey]

im going to put oil and antifreeze and stuff in it tomorrow and attempt to start it but i may need you to come by to pull start it

[fukjoey]

had to pull the head off today for the sixth time im getting a oem head gasket piss on metal ones

[SEDUCTIVE TENN.]

WAIT , SO LET ME GET THIS STRAIGHT ? YOUR GONNA TALK SHIT ABOUT OTHER PEOPLES TRUCKS WHEN DONT EVEN OWN A FUCKING VEHICLE TO BEGIN WITH ? YOU SIR , JUST MADE DOUCHE OF THE YEAR ! WHAT A FUCKTARD YOU ARE !

[1lo88zu]

Good job andy. LOL

Nice looking quad, should haul ass

[one low fullsize]

WAIT , SO LET ME GET THIS STRAIGHT ? YOUR GONNA TALK SHIT ABOUT OTHER PEOPLES TRUCKS WHEN DONT EVEN OWN A FUCKING VEHICLE TO BEGIN WITH ? YOU SIR , JUST MADE DOUCHE OF THE YEAR ! WHAT A FUCKTARD YOU ARE !

lol im sorry but thats just funny..

[d21cruisa]

WAIT , SO LET ME GET THIS STRAIGHT ? YOUR GONNA TALK SHIT ABOUT OTHER PEOPLES TRUCKS WHEN DONT EVEN OWN A FUCKING VEHICLE TO BEGIN WITH ? YOU SIR , JUST MADE DOUCHE OF THE YEAR ! WHAT A FUCKTARD YOU ARE !

I approve this message and so does :chucknorris:

[fukjoey]

WAIT , SO LET ME GET THIS STRAIGHT ? YOUR GONNA TALK SHIT ABOUT OTHER PEOPLES TRUCKS WHEN DONT EVEN OWN A FUCKING VEHICLE TO BEGIN WITH ? YOU SIR , JUST MADE DOUCHE OF THE YEAR ! WHAT A FUCKTARD YOU ARE !

wasnt talking shit just asking questions but idc if i have a car like i said if you could fucking read i dont have anywhere to go that would be a waste of money you dumb mother fucker so you are you fucktard sir and i said sorry for being a dick on your before they cleaned the thread up so fuck you and your piece of shit mazda

[d21cruisa]

wasnt talking shit just asking questions but idc if i have a car like i said if you could fucking read i dont have anywhere to go that would be a waste of money you dumb mother fucker so you are you fucktard sir and i said sorry for being a dick on your before they cleaned the thread up so fuck you and your piece of shit mazda

DUMBAAASSSSSSSSSSSSSSSSSSSS

[one low fullsize]

wow this shits never gonna get old...

[1lowzu]

WAIT , SO LET ME GET THIS STRAIGHT ? YOUR GONNA TALK SHIT ABOUT OTHER PEOPLES TRUCKS WHEN DONT EVEN OWN A FUCKING VEHICLE TO BEGIN WITH ? YOU SIR , JUST MADE DOUCHE OF THE YEAR ! WHAT A FUCKTARD YOU ARE !

congradulations you just sunk to his level we know have 2 in the running for okcminis 2010 douche of the year take a bow you should both be proud of yourselves lololol

[85c10on20s]

:nono::bdance::bdance::rock::rock::elephant::rtfr:

[( . )( . )]

That "very shitty prepped and sprayed base" looks way worse than Andys rattle-canned mazda!





One in a glass house, shouldnt throw stones...

[low psi]

AHHH such the philocipher

[1lowyota]

:69:

[fukjoey]

That "very shitty prepped and sprayed base" looks way worse than Andys rattle-canned mazda!





One in a glass house, shouldnt throw stones...

but metal doesnt tend to hold paint very well and he was painting plastic there is no conparision

[one low fullsize]

it does with some primer

[fukjoey]

ya but i had none so i just sprayed it and it was shitty

[one low fullsize]

dude does it really matter any ways all the sand and what ever else is just gonna chip the frame any ways who gives a shit about the paint...but on the other hand i think you should dip it in chrome shit son be ballin then

[1lowzu]

im gonna rattle can my whole frame blacker than wesley snipes

[one low fullsize]

im gonna rattle can my whole frame blacker than wesley snipes

lmao thats funny

[fukjoey]

joey you need to look up chroming inbrittlment

[1lowzu]

dylan you need to quit lookin up man on man creampie porn

[one low fullsize]

Hydro-Platers is a premiere industrial Hard Chrome, Electroless Nickel and Sulfamate Nickel plating supplier in Milwaukee Wisconsin. Hydro-Platers has been serving satisfied customers since 1970. Our company proudly sets the industry standards for hard chrome and electroless nickel plating.

[one low fullsize]

Hydro-Platers hard chrome plating meets each customer’s most stringent specifications and quality requirements. We plate to hundreds of different customer requirements, including military plating specifications. Constant employee training and empowerment are key to maintaining our reputation for delivering superior quality hard chrome products, along with the use of the most accurate measuring and inspection equipment. Our plating technology is fully capable of meeting the demands of today and the innovations of tomorrow's hard chrome. We are located in the Milwaukee, Wisconsin area.

[one low fullsize]

Hydro-Platers offers both mid phosphorus and high phosphorus Electroless nickel Plating. Electroless Nickel is often used on various types of parts to protect against wear and corrosion. The uniform deposit of nickel is especially useful for hydraulic cylinders, worm feeds, gears, bellows, shafts, chain belts and other close fitting components. There are also many other uses of electroless nickel where the coating can provide reduced cost, longer life and improved reliability. These included domestic appliances, plumbing fixtures, and food processing equipment, sanitary ware, photographic processing equipment and solar absorber surfaces.

ELECTROLESS NICKEL PLATING

MID PHOSPHORUS ELECTROLESS NICKEL CONTENT

7 to 9% (depends on age of Electroless Nickel bath and operating pH)
HIGH PHOSPHORUS ELECTROLESS NICKEL CONTENT

9 to 12% (depends on age of bath and operating pH)
HARDNESS OF PLATING

As plated, 500 to 600 D.P.H. (48 to 50Rc)
Heat treated to 400ûC (750ûF) for 60 minutes. 900-1000 D.P.H. (60 to 70) Rc)
DUCTILITY OF PLATING

Will pass 180û bend test as specified by MII-C-26074 and ASTM B 571
COLOR OF PLATING

Semi-bright Electroless Nickel deposit resembling polished stainless steel
MAXIMUM CAPACITIES: WIDTH 30 Inches LENGTH 78 Inches DEPTH 60 Inches WEIGHT 2000 Pounds

EXISTING FACILITIES TO ALLOW FOR THE SET UP OF ADDITIONAL TANKS • To accommodate an increase in our customer base and work load

[one low fullsize]

any thing else you would like to know about lol cuz copy and paste it the SHIT!!!

[1lowzu]

We are located in the Milwaukee, Wisconsin area.

hhmmmmm thats a distance that makes it more work than its worth to have a chrome frame

[fukjoey]

ok joey they to find instrutions on shimming a starter for a 1998 dodge 4x4 diesel

[1lowzu]

ok joey they to find instrutions on shimming a starter for a 1998 dodge 4x4 diesel

what the hell 4

[one low fullsize]

this is for a power max Diesel Starter, 2.5kW Dodge Cummins 5.9L........1. Remove the three socket head bolts that hold the
aluminum mounting block to the starter-assembly.
2. Carefully remove the mounting block from the
starter.
3. The round shaped shim should be installed between
the mounting block and the starter body.
4. Align the holes in the block, the shim, and the
starter. Reinstall and tighten the three socket head
bolts.

[one low fullsize]

i hope thats what you needed cuz you didnt really say what motor or anything so there ya go...and why the hell do you need to know all this?

[fukjoey]

WRONG you dont shim a diesel starter it will break the gear off and send it through the trans i had to listen to a 2 hours speach from bruces dad over it

[one low fullsize]

ok joey they to find instrutions on shimming a starter for a 1998 dodge 4x4 diesel

well look at what you gave me to work wit you shit stain...all you said was diesel which i didn't think to much of until i went looking and seen just how many different diesel motors there are and i just spent the last hour looking for that info so suck on my balls if its not right you ungratefull waste of space on this planet look it up your damn self

[fukjoey]

i was just sending you on a wild goose chase for fun lol

[one low fullsize]

ya i had that thought in the back of my mind....so you dont even know if thats shits wrong do you?

[fukjoey]

you dont shim a diesel starter so its actually wrong

[1lowzu]

ya i had that thought in the back of my mind....so you dont even know if thats shits wrong do you?

he probrably didnt even read any of it joey

[one low fullsize]

your a dick llol

[1lowzu]

hey joey can you fine me the retail value of an 83 corvette lol

[one low fullsize]

he probrably didnt even read any of it joey

its cool fat boys gotta eat so that means fat boy might choke one of these days i just gotta set back and wait

[fukjoey]

how often do you even eat with me like twice a year

[fukjoey]

can you find me a service manual on a 1966 chevy camero

[one low fullsize]

i didnt say i was gonna be there i just said all i gotta do is set back and wait...and that means anywhere

[one low fullsize]

can you find me a service manual on a 1966 chevy camero

and you can blow me

[1lowzu]

you 2 should just fight and get it over with

[1lowzu]

and you can blow me

you looked didnt you

[one low fullsize]

hey joey can you fine me the retail value of an 83 corvette lol

nope im done looking for shit now...copy and paste let me down

[fukjoey]

and you can blow me

please tell me you looked it up hahahahahahahahahahahahahahahahahahahahahahahahaha hahahahahahahahahahahahahahahahahahahahahahahahaha hahahahahahahahahahahahahahahahahahahahahahahahaha hahahahahahahahahahahahahahahahahahahahahahahahaha hahahahahahahahahahahahahahahahahahahahahahahahaha hahahahahahahahahahahahahahahahahahahahahahahahaha hahahahahahahahahahahahahahahahahahahahahahahahaha hahahahahahahahahahahahahahahahahahahahahahahahaha hahahahahahahahahahahahahahahahahahahahahaha

[one low fullsize]

you looked didnt you

no cuz i figger going back that old they wont have one

[1lowzu]

they made them in 82 and 84 but in 83 they didnt

[one low fullsize]

please tell me you looked it up hahahahahahahahahahahahahahahahahahahahahahahahaha hahahahahahahahahahahahahahahahahahahahahahahahaha hahahahahahahahahahahahahahahahahahahahahahahahaha hahahahahahahahahahahahahahahahahahahahahahahahaha hahahahahahahahahahahahahahahahahahahahahahahahaha hahahahahahahahahahahahahahahahahahahahahahahahaha hahahahahahahahahahahahahahahahahahahahahahahahaha hahahahahahahahahahahahahahahahahahahahahahahahaha hahahahahahahahahahahahahahahahahahahahahaha

easy chubbs i didnt look

[1lowzu]

no cuz i figger going back that old they wont have one

joey 67 was the first year

[one low fullsize]

they made them in 82 and 84 but in 83 they didnt

welp this has been fun boys but im goin to bed peace

[one low fullsize]

joey 67 was the first year

dude i dont know about that old ass car history shit and i only like a handfull of older models as it is so yeah ill be the first one to tell you i dont have a clue about it

[fukjoey]

why you going to bed none of us have to be anywhere tomorrow

[1lowzu]

well your lucky i hate corvettes but i seem to know alot about em i hate it

[fukjoey]

i thought that was your dream car

[1lowzu]

i thought that was your dream car

you shut your goddamn mouth there is only one dream car for me and that the bandits Trans AM and im talkin about the TA form the first smokey and the bandit no the queer ass ones form the other 3 movies

[okcderek]

I just want to know why get on a truck forum if you have no need to build or drive a truck/car ?

[d21cruisa]

I just want to know why get on a truck forum if you have no need to build or drive a truck/car ?

especially when "bagged trucks are for pussies"

[one low fullsize]

well man ill explain it for you....see fukjoey is 1 lowzus bitch what ever zu asks em to do he will and from the way he acts and everything best i can figger is he wants to be just like 1lowzu...zu can beat his ass all day and fukjoey keeps askin for more i dont get it but maybe when he sees this he can explain alittle better

[1lowzu]

well man ill explain it for you....see fukjoey is 1 lowzus bitch what ever zu asks em to do he will and from the way he acts and everything best i can figger is he wants to be just like 1lowzu...zu can beat his ass all day and fukjoey keeps askin for more i dont get it but maybe when he sees this he can explain alittle better

you r retarded he acts nothing like me and he never does what i tell him to do but he does occasionaly do what i ask but never what i tell him to do thats why i have to hit him well i also hit him because its fun

[fukjoey]

well man ill explain it for you....see fukjoey is 1 lowzus bitch what ever zu asks em to do he will and from the way he acts and everything best i can figger is he wants to be just like 1lowzu...zu can beat his ass all day and fukjoey keeps askin for more i dont get it but maybe when he sees this he can explain alittle better

your about a retard i dont jump to him with the snap of a finger like taylor and if i wanted to be just like him dont i would but i dont if anyone here has a bitch its kenny to you all you do is work on his frame and shit when we just sit back and watch

[1lowzu]

kenny likes young boys and yellow shorts

[one low fullsize]

ya dick for give me for not being lazy i like to work on shit and seeing how i cant work on my truck its the next best thing...not only that but just from being in that shop ive learned a shit ton about all this shit so now your ragging on me becuz i work for fun...plus that truck might be going places so yeah i guess it would be nice to say i had a hand in it and if the full force customs really is a club aint that what club members do is help each other out with there projects....they did it for me why cant i do it for them???

[1lowzu]

very nicely put :withstupid:lol

[one low fullsize]

very nicely put :withstupid:lol

what you dont agree???

[1lowzu]

hhhhhmmmm the arrow on the sign seemd to be pointing at pointing at you what does that tell you

[one low fullsize]

hmm what do i think hmm well i guess ill keep that to my self.

[91tyler1]

you shut your goddamn mouth there is only one dream car for me and that the bandits Trans AM and im talkin about the TA form the first smokey and the bandit no the queer ass ones form the other 3 movies

i was hurting for cash one day last January and sold a 1978 trans am in like perfect shape just needed a motor for $200

[one low fullsize]

i was hurting for cash one day last January and sold a 1978 trans am in like perfect shape just needed a motor for $200

hmm thats kind of a shame its getting harder and harder to find those things in good shape

[1lowzu]

i was hurting for cash one day last January and sold a 1978 trans am in like perfect shape just needed a motor for $200

damn you thats like pushing someone in a wheelchair down an escalater that going up

[fukjoey]

ya dick for give me for not being lazy i like to work on shit and seeing how i cant work on my truck its the next best thing...not only that but just from being in that shop ive learned a shit ton about all this shit so now your ragging on me becuz i work for fun...plus that truck might be going places so yeah i guess it would be nice to say i had a hand in it and if the full force customs really is a club aint that what club members do is help each other out with there projects....they did it for me why cant i do it for them???

ya they did help i mean build your truck and front what i hear not saying any names that your not even a part of that but who am i to say im not in it but i dont just say im in it without them even saying yes

[one low fullsize]

oh my bad i guess im sporting the stickers and helping with other shit for nothing right?? hmm well i guess ive wasted my time then huh? well then if thats the case ill scrap em off and and shut down the myspace and all the other shit ive got on em...

[laidout]

never ending

[one low fullsize]

oh idk im pretty much done now...

[fukjoey]

oh my bad i guess im sporting the stickers and helping with other shit for nothing right?? hmm well i guess ive wasted my time then huh? well then if thats the case ill scrap em off and and shut down the myspace and all the other shit ive got on em...

doesnt look like anyone else is saying not to scrap it off and delete the myspace??? point proven

[stroker-c10]

Wow im thinking we need a few more mods on this site.....you guys are acting like a couple of 12 year old kids in a jerk off contest.

[okcderek]

Take all the bickering to PMs, your whoring up the build thread...

[stroker-c10]

Thank you derek.

[( . )( . )]

SHUT THE FUCK UP!!!!!!!!!!!!!!!!!

[fukjoey]

SHUT THE FUCK UP!!!!!!!!!!!!!!!!!

FUCK you bitch and its my build thread why the hell cant i whore it out

[okcderek]

FUCK you bitch and its my build thread why the hell cant i whore it out

You sure are a tough ass on your computer. And I was just trying to keep your build thread on topic.................honestly, I dont give a shit about you or your build thread.

[fukjoey]

ok then piss on me

[( . )( . )]

FUCK you bitch and its my build thread why the hell cant i whore it out

ok then piss on you as well

Wrong answer little man

[AlwaysStunting]

:fruit:

[SEDUCTIVE TENN.]

this thread is as entertaining as a pillipino meth head in rehab !

[Big Steve]

SHUT THE FUCK UP!!!!!!!!!!!!!!!!!

Your not the boss of me.

[bagged dak]

this is sweet! its quite entertaining. :)

[1lowzu]

the 4wheeler is gone he traded it for my old hardbody close this thread its even more useless than it already was

[SEDUCTIVE TENN.]

wow , so he actually has a vehicle thats street legal now ? lmmfao !

[DanDan]

word